搜尋此網誌

2016年1月18日 星期一

UDK2014 How to Build

UDK2014 - How to build instructions
Download the UDK2014 Release with expanded workspace directories DownLoad

UDK2014 Release Files / Directories

What is included in the Downloaded zip file
  • UDK2014.MyWorkSpace.zip
  • BaseTools(Windows).zip
  • BaseTools(Unix).tar
  • Documents
  • Notes

Windows System Configuration

Microsoft Windows 7 Ultimate 64-bit*
1. Setup Build Environment
  • 1) Install Microsoft Visual Studio 2008* SP1 in the build machine and make sure that AMD64 complier was selected when installing.
2. Extract Common Source Code
  • 1) Extract files in [UDK2014.MyWorkSpace.zip] to the working space directory (e.g C:). Note the Directory "MyWorkSpace" will be created as a result. In this case, it is C:\MyWorkspace.
  • 2) There are two BaseTools package one is for Windows system and another is for UNIX-Like system. Please make sure BaseTools(Windows).zip is used here. Expand the appropriate BaseTools to C:\MyWorkSpace
3. Generate OpenSSL* Crypto Library Note: this does not need to be done for Nt32
  • Open file "C:\MyWorkspace\CryptoPkg\Library\OpensslLib\Patch-HOWTO.txt" and follow the instruction to install OpenSSL* for UEFI building.

http://ftp.vim.org/security/openssl/

=====================================================================
                                OpenSSL-Version
=====================================================================
  Current supported OpenSSL version for UEFI Crypto Library is 1.0.2d.
    http://www.openssl.org/source/openssl-1.0.2d.tar.gz
=====================================================================
                      HOW to Install Openssl for UEFI Building
=====================================================================
1.  Download OpenSSL 1.0.2d from official website:
    http://www.openssl.org/source/openssl-1.0.2d.tar.gz

    NOTE: Some web browsers may rename the downloaded TAR file to openssl-1.0.2d.tar.tar.
          When you do the download, rename the "openssl-1.0.2d.tar.tar" to
          "openssl-1.0.2d.tar.gz" or rename the local downloaded file with ".tar.tar"
          extension to ".tar.gz".

2.  Extract TAR into CryptoPkg/Library/OpenSslLib/openssl-1.0.2d

    NOTE: If you use WinZip to unpack the openssl source in Windows, please
          uncheck the WinZip smart CR/LF conversion option (WINZIP: Options -->
          Configuration --> Miscellaneous --> "TAR file smart CR/LF conversion").

3.  Apply this patch: EDKII_openssl-1.0.2d.patch, and make installation

    For Windows Environment:
    ------------------------
    1) Make sure the patch utility has been installed in your machine.
       Install Cygwin or get the patch utility binary from
          http://gnuwin32.sourceforge.net/packages/patch.htm
    2) cd $(WORKSPACE)\CryptoPkg\Library\OpensslLib\openssl-1.0.2d
    3) patch -p0 -i ..\EDKII_openssl-1.0.2d.patch
    4) cd ..
    5) Install.cmd

    For Linux* Environment:
    -----------------------
    1) Make sure the patch utility has been installed in your machine.
       Patch utility is available from http://directory.fsf.org/project/patch/
    2) cd $(WORKSPACE)/CryptoPkg/Library/OpensslLib/openssl-1.0.2d
    3) patch -p0 -i ../EDKII_openssl-1.0.2d.patch
    4) cd ..
    5) ./Install.sh
=====================================================================

4. Build Steps *** NT32 ***
  • 1) Open a command prompt, type command "cd C:\MyWorkspace" to enter the workspace directory, and then type command
> edksetup --nt32
to initialize the working environment. See also: Windows_systems_ToolChain_Matrix for how to change the TOOL_CHAIN_TAG for supported compiler combinations.
  • 2) Type below commands to build platforms (below assumes Microsoft Visual Studio 2008)
> build -t VS2008x86
Note: There are two methods to select the tool chain (Use Microsoft Visual Studio 2008* as sample):
  • 1. Update TOOL_CHAIN_TAG in file Conf/target.txt: TOOL_CHAIN_TAG = VS2008
  • 2. Add -t build option in command line: "build -t VS2008 ... "
For 32-bit VS2008 on 64-bit WINDOWS OS, VS2008x86 should be selected instead of VS2008. Please refer to tools_def.txt for all supported tool chains and detailed descriptions. (tools_def.txt will be generated at Conf directory after running "edksetup".)
  • 3. Note Microsoft Visual Studio* 2010 is supported with -t VS2010 or -t VS2010x86


Unix-Like System Configuration

Ubuntu
DistributorID: Ubuntu*
Description: Ubuntu 10*
Release: Ubuntu 10.10*
Codename: Karmic*
1. Extract Common Source Code
  • 1) Create a working space directory in the build machine, for example, ~/src/
  • 2) Extract files in [UDK2014.MyWorkSpace.zip] the working space directory. In this case, it is ~/src/MyWorkSpace where /MyWorkSpace is created.
  • 3) There are two BaseTools packages, one is for Windows system and another is for UNIX-Like system. Please make sure BaseTools(Unix).tar is used here.
2. Generate OpenSSL* Crypto Library Note: This does not need to be done for Nt32 Open file "~/src/MyWorkspace/CryptoPkg/Library/OpensslLib/Patch-HOWTO.txt" and follow the instruction to install OpenSSL* for UEFI building.
3. See How to Set up Build environment Using EDK II with Native GCC for newer versions of Linux
  • a) Please note that here the root is "~/src/MyWorkSpace" instead of "~/src/edk2"
  • b) Make sure BaseTools is built and required software like iASL compiler is installed well.
  • c) Some operations need switch to user "root" to execute.
4. Build Steps *** Nt32 ***
  • 1) Open a terminal and type "cd ~/src/MyWorkSpace" to enter the workspace directory.
  • 2) Initialize the build environment by typing
>. edksetup.sh BaseTools
  • 3) Type below commands to build platforms
> build -t GCC44

沒有留言:

張貼留言